View RGL34G_422393.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RGL34A THRU RGL34J
SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 600 Volts
* D
Forward Current - 0.5 Ampere
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mount applications High temperature metallurgically bonded construction Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 Fast switching for high efficiency High temperature soldering guaranteed: 450C/5 seconds at terminals. Complete device submersible temperature of 260C for 10 seconds in solder bath
E
N
T
E
DO-213AA
P A T
SOLDERABLE ENDS 1st BAND 2nd BAND
D2
D1= 0.066 0.060 (1.676) (1.524)
0.022 (0.559) 0.016 (0.406) 0.145 (3.683) 0.131(3.327) 1st band denotes type and polarity 2cnd band denotes voltage type D2 = D1 + 0 - 0.008 (0.20)
MECHANICAL DATA
Case: JEDEC DO-213AA molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.0014 ounce, 0.036 gram
*Glass-plastic encapsulation technique is covered by
Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306
(R)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
Fast switching device: 1st band is Red Polarity color bands (2nd Band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT=55C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 0.5A Maximum DC reverse current at rated DC blocking voltage TA=25C TA=125C
SYMBOLS
RGL34A
RGL34B
RGL34D
RGL34G
RGL34J
UNITS
VRRM VRMS VDC I(AV)
Gray 50 35 50
Red 100 70 100
Orange 200 140 200 0.5
Yellow 400 280 400
Green 600 420 600
Volts Volts Volts Amp
IFSM VF IR IR(AV) trr CJ RJA RJT TJ, TSTG
10.0 1.3 5.0 50.0 30.0 150 4.0 150.0 70.0 -65 to +175 250
Amps Volts A A ns pF C/W C
Maximum full load reverse current, full cycle average TA=55C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Maximum thermal resistance (NOTE 3) (NOTE 4) Operating junction and storage temperature range
NOTES: (1) Reverse recovery test conditions IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal (4) Thermal resistance from junction to terminal, 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal
4/98
RATINGS AND CHARACTERISTIC CURVES RGL34A THRU RGL34J
FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
0.5
PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD
12 10 8.0 6.0 4.0 2.0 0
TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
0.4
0.3
0.2
0.1
0
0
25
50
75
100
125
150
175
1
10
NUMBER OF CYCLES AT 60 HZ
100
TERMINAL TEMPERATURE, C
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
10
INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
10
1
TJ=100C
1
TJ=25C
0.1
PULSE WIDTH=300s 1% DUTY CYCLE
TJ = 25C
0.1
0.01 0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
0.01 0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
10
JUNCTION CAPACITANCE, pF
TJ=25C f=1.0 MHz Vsig=50mVp-p
1
1
10
REVERSE VOLTAGE, VOLTS
100

▲Up To Search▲

Price & Availability of RGL34G

	To Download RGL34G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .